| L6-16E9Z Rotek Slewing Ring Bearings | d:88,9 mm; Da max.:133,8 mm; Da min:122,8 mm; da min.:94,6 mm; Size (mm):88.9x139.7x77.78; b:10,5 mm; C:66,68 mm; Width (mm):77,78; Bore Diameter (mm):88,9; b1:8 mm; ra max.:0,6 mm; da max:101,7 mm; dk:128,016 mm; B:77,78 mm; r2 min.:1 mm; rb max.:1 mm; Angle:6 °; Outer Diameter (mm):139,7; D:139,7 mm; M:6,5 mm; |
| RKS.161.14.0944 SKF Slewing Ring Bearings | D:129,6 mm; d:28 mm; Width (mm):49,5; Bore Diameter (mm):28; Size (mm):28x129.6x49.5; Outer Diameter (mm):129,6; Bearing number:PHU2241; B:49,5 mm; |
| A9-24P2 Rotek Slewing Ring Bearings | OD Chamfer Length (Co):3.000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Outside Diameter Tolerance (Do tol.):95 +0.035 / +0.013; Housing Bore Dia. (Dh) - 95 +0.035 / -0:95 +0.035 / 0; Bore Diameter (mm):75; Outer Diameter (mm):95; ID Chamfer Angle (B deg.):15; Bearing Type:straight; Bearing Length, Nominal (B):80.000; Bearing number:AST650 759580; Shaft Dia., Nominal (d):75.0000; |
| A8-22E6 Rotek Slewing Ring Bearings | r min.:3 mm; (Grease) Lubrication Speed:3200 r/min; Bore Diameter (mm):90; Width (mm):43; Bearing number:7318DB; Size (mm):90x190x43; 2B:86 mm; Outer Diameter (mm):190; Angle (α):25 °; Basic static load rating (C0):294 kN; C:43 mm; d:90 mm; Weight:10,12 Kg; D:190 mm; Basic dynamic load rating (C):277 kN; B:43 mm; |
| A14-24P1A Rotek Slewing Ring Bearings | L5:145 mm; H2:83 mm; A2:35 mm; L2:16 mm; H1:102 mm; A1:16 mm; N:29 mm; L3:83 mm; A:49 mm; B1:50 mm; H:117 mm; Bearing number:UKT209+H2309; N1:19 mm; Bore Diameter (mm):40; L:144 mm; N2:49 mm; L1:87 mm; d:40 mm; |
| RKS.062.20.1094 SKF Slewing Ring Bearings | Weight:0,0466 Kg; Fw:42 mm; Bearing number:K 42x47x27; Ew:47 mm; Basic dynamic load rating (C):33 kN; Outer Diameter (mm):47; Basic static load rating (C0):74,5 kN; Bc:27 mm; Bore Diameter (mm):42; |
| M5-22P1Z Rotek Slewing Ring Bearings | C:2 mm; B:2 mm; r min.:0,1 mm; Bore Diameter (mm):4; Basic dynamic load rating (C):0,16 kN; Bearing number:MR74; Outer Diameter (mm):7; Width (mm):2; D:7 mm; Size (mm):4x7x2; d:4 mm; |
| A12-34P2B Rotek Slewing Ring Bearings | C - Cup Width:0.7812 in; e - ISO Factor2:0.55; Cup Part Number:HM88610P; Design Units:Imperial; D:2.8438 in; Db - Cup Backface Backing Diameter:2.36 in; Da - Cup Frontface Backing Diameter:2.74 in; Series:HM88600; Cg - Geometry Factor:0.0822; Y - ISO Factor3:1.1; r - Cup Backface To Clear Radius1:0.090 in; |