| L4-13P8ZD Rotek Slewing Ring Bearings | B:3 mm; Outer Diameter (mm):11; C:3 mm; C1:0,6 mm; Weight:0,0008 Kg; r1 min.:0,08 mm; (Grease) Lubrication Speed:49000 r/min; Basic static load rating (C0):0,2 kN; Size (mm):7x11x3; Width (mm):3; ba min.:7,8 mm; C2:0,6 mm; d:7 mm; Bore Diameter (mm):7; Bearing number:WMLF7011ZZX; r min.:0,1 mm; ra max.:0,08 mm; D1:12,2 mm; D2:12,2 mm; Basic dynamic load rating (C):0,46 kN; |
| M4-30P4Z Rotek Slewing Ring Bearings | r min.:1 mm; Width (mm):77,775; Angle:6 °; Basic dynamic load rating (C):1024 kN; Weight:4,8 Kg; C:66,675 mm; Outer Diameter (mm):139,7; r1 min.:1 mm; B:77,775 mm; d:88,9 mm; Bore Diameter (mm):88,9; Bearing number:GEZ88ET-2RS; Size (mm):88.9x139.7x77.775; D:139,7 mm; dk:128 mm; |
| A14-19P4 Rotek Slewing Ring Bearings | (Grease) Lubrication Speed:24000 r/min; Bore Diameter (mm):9,525; Bearing number:WJC-060806; Basic dynamic load rating (C):3,87 kN; Bc:9,53 mm; Fw:9,525 mm; Weight:0,003 Kg; Outer Diameter (mm):12,7; Ew:12,7 mm; Basic static load rating (C0):4 kN; |
| RKS.221300101001 SKF Slewing Ring Bearings | Y - ISO Factor3:1.77; Da - Cup Frontface Backing Diameter:4.25 in; Cg - Geometry Factor:0.107; Db - Cup Backface Backing Diameter:3.98 in; C - Cup Width:0.9375 in; Design Units:Imperial; D:4.4375 in; Series:39500; Cup Part Number:39520XX; e - ISO Factor2:0.34; r - Cup Backface To Clear Radius1:0.130 in; |
| RKS.162.14.0544 SKF Slewing Ring Bearings | Seal Type:V-ring; A1:120 mm; End Cover2:EC524-620; L:410.00 mm; N1:24.00 mm; Housing:FSNT 524-620; Shaft Diameter d:90 mm; Locating Rings (width x OD):SR215X19.5; UPC Code:999999999; H:271 mm; Bearing:21320K; G:M16; H1:140.0 mm; Lockwasher:MB20; Seal:VR620; Bolt Qty:4; H2:45.0 mm; J:350.00 mm; Housing Mass:26.5 Kg; A:185.00 mm; |
| RKS. 212600101001 SKF Slewing Ring Bearings | Size (mm):35x47x30; C1:10 mm; Bearing number:NX 35; C:30 mm; Fw:35 mm; D:47 mm; Outer Diameter (mm):47; d1:35 mm; Bore Diameter (mm):35; Width (mm):30; |
| RKS.061.20.0644 SKF Slewing Ring Bearings | Material:Cast bronze with sol; Bearing Type:straight; Outer Diameter (mm):75; Bearing Outside Diameter, Nominal(Do):75.000; ID Chamfer Length (Ci):1.200; Bore Diameter (mm):60; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Length, Nominal (B):70.000; ID Chamfer Angle (B deg.):15; Bearing Outside Diameter Tolerance (Do tol.):75 +0.030 / +0.011; Housing Bore Dia. (Dh) - 75 +0.030 / -0:75 +0.030 / 0; |
| L6-16P9Z Rotek Slewing Ring Bearings | Weight:0,192 Kg; D:47 mm; d:32 mm; S:1,5 mm; Bore Diameter (mm):32; (Grease) Lubrication Speed:12000 r/min; B:30 mm; C:30 mm; Outer Diameter (mm):47; Basic dynamic load rating (C):38,2 kN; Width (mm):30; Size (mm):32x47x30; Bearing number:NKJ32/30; Basic static load rating (C0):73,9 kN; Fw:37 mm; r5 min.:0,3 mm; |