| HS6-25N1Z Kaydon Slewing Ring Bearings | d:25 mm; B:12 mm; d1:32.1 mm; Static axial stiffness, preload class D:159 N/µm; Preload class B GB:120 N; Calculation factor e:0.68; D:47 mm; a:14.5 mm; Calculation factor f2A:1; Static axial stiffness, preload class B:92 N/µm; Static axial stiffness, preload class C:119 N/µm; Db max.:45 mm; Attainable speed for grease lubrication:40000 r/min; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| MTO-415T Kaydon Slewing Ring Bearings | Db2:60.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; T:37.3 mm; RG:1/4-28 UNF; A:29.5 mm; Basic static load rating C0:6.55 kN; B4:4.5 mm; N:11.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; H:112 mm; J7:11.5 mm; J6:74 mm; Rα:45 °; Fatigue load limit Pu:0.28 kN; Hexagonal key size for grub screw N:3.175 mm; J:90 mm; B:25.5 mm; Da:50.8 mm; Recommended tightening torque for grub screw:4 N·m; |
| KH-225E Kaydon Slewing Ring Bearings | d:45 mm; rs (min):1.5 mm; Static (Cor):5.5 mm; D:100 mm; Dynamic (Cr):3 mm; Grease:194 kN; Oil:23.660 kN; Pu:167 kN; with cylindrical bore:3 700 min-1; with tapered bore:4 500 min-1; B:36 mm; |
| MTO-210T Kaydon Slewing Ring Bearings | Permissible sliding velocity v max.:5 m/s; Mass bushing:0.077 kg; D:41 mm; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; B:35 mm; Coefficient of friction µ min.:0.05; d:35 mm; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; |
| VSI200644-N INA Slewing Ring Bearings | Sealed Speed Rating n3:3200 rpm; d:75.000 mm; Basic Static Radial Load Rating Co:137000 N; Accessories:One Shield; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; B:41.30 mm; Oil Speed Rating n2:4300 rpm; D:130.0000 mm; Grease Speed Rating n1:3200 rpm; |
| 16379001 Kaydon Slewing Ring Bearings | P90°:105 kN; J1:60.325 mm; End plug (suffix Y):EPR 15; Cap bolt:5/8-11 UNC; P150°:58.7 kN; Taconite seal:TER 101; Initial grease fill:181.44 g; A1:111.125 mm; L:387.35 mm; da:85.725 mm; J min.:295.275 mm; S:4.763 mm; P120°:64.9 kN; N1:22.225 mm; H:222.25 mm; P180°:71.2 kN; R2:30.163 mm; J max.:333.375 mm; Cap bolt recommended tightening torque:298.3 N·m; R1:58.737 mm; |
| XU050077 INA Slewing Ring Bearings | Cap bolt, SAE grade:5; Initial grease fill:68.04 g; P90°:32.5 kN; J min.:219.075 mm; P150°:18.2 kN; Taconite seal:TER 36; R2:21.431 mm; Max. speed for Taconite seal:1250 r/min; ba:32.544 mm; Cap bolt:2 x 1/2-13 UNC; L:285.75 mm; H:157.559 mm; J max.:244.475 mm; Appropriate attachment bolt size G:0.5 in; J1:47.625 mm; da:60.325 mm; A2:193.675 mm; RG:1/4 NPT; End plug (suffix Y):EPR 7; h:28.575 mm; |
| 16269001 Kaydon Slewing Ring Bearings | Labyrinth ring:2 x LOR 107; RG:3/8 NPT; Housing:SAF 522; Cap bolt:2 x 3/4-10 UNC; N1:22.225 mm; S:4.763 mm; Cap bolt recommended tightening torque:203.4 N·m; J max.:368.3 mm; Da:200 mm; H2:50.8 mm; P120°:55.6 kN; J min.:320.675 mm; h:45.244 mm; L:419.1 mm; Ca:62.789 mm; R2:31.75 mm; P60°:149 kN; Initial grease fill:232.47 g; H1:125.425 mm; P150°:50.7 kN; |