| MTE-324X Kaydon Slewing Ring Bearings | Recommended tightening torque for grub screw:6.5 N·m; Mass bearing unit:0.77 kg; d:31.75 mm; Basic dynamic load rating C:21.6 kN; L:125 mm; B4:6 mm; A5:28.2 mm; Fatigue load limit Pu:0.655 kN; H2:40 mm; A2:30 mm; G1:21 mm; Basic static load rating C0:15.3 kN; Grub (set) screw G2:5/16-24 UNF; Housing material:Composite for food a; L1:76 mm; A1:12 mm; s1:25.4 mm; L3:63.5 mm; G:M16; Limiting speed with shaft tolerance h6:3200 r/min; |
| RK6-33E1Z Kaydon Slewing Ring Bearings | ba:50.006 mm; Appropriate attachment bolt size G:0.75 in; P90°:89 kN; Housing:SAF 522; H:239.316 mm; Taconite seal:TER 557; h:45.244 mm; P120°:55.6 kN; Ca:62.789 mm; J min.:320.675 mm; Da:200 mm; Initial grease fill:232.47 g; Cap bolt, SAE grade:5; Max. speed for Taconite seal:775 r/min; Cap bolt:2 x 3/4-10 UNC; End plug (suffix Y):EPR 13; PG:1/4 NPT; R1:67.866 mm; P60°:149 kN; R2:31.75 mm; |
| 16352001 Kaydon Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:9500 rpm; Accessories:One Seal; Fillet Radius ra:0.30 mm; D:58.0000 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; Sealed Speed Rating n3:6700 rpm; B:7.00 mm; Basic Dynamic Radial Load Rating C:6050 N; d:45.000 mm; Basic Static Radial Load Rating Co:5100 N; |
| VSU200414 INA Slewing Ring Bearings | Housing material:Composite; A1:15.3 mm; N:12.3 mm; Fatigue load limit Pu:0.475 kN; Recommended tightening torque for grub screw:4.2 N·m; L:108 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Limiting speed:6300 r/min; s1:23 mm; Recommended diameter for attachment bolts, mm G:10 mm; Basic dynamic load rating C:19.5 kN; A3:3.2 mm; Mass bearing unit:0.5 kg; T:43 mm; Basic static load rating C0:11.2 kN; |
| 16275001 Kaydon Slewing Ring Bearings | Basic Static Radial Load Rating Co:19000 N; Accessories:Two Shields & Snap-R; B:21.00 mm; Grease Speed Rating n1:8500 rpm; d:35.000 mm; Oil Speed Rating n2:10000 rpm; D:80.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:33200 N; Sealed Speed Rating n3:6000 rpm; |
| MTO-17 Kaydon Slewing Ring Bearings | A1:29 mm; L:160.5 mm; A:44 mm; Hexagonal key size for grub screw N:3.969 mm; Rα:45 °; H2:19 mm; d:36.512 mm; J max.:133 mm; J min.:119 mm; Recommended diameter for attachment bolts, mm G:12 mm; Housing material:Stainless steel; A5:31.1 mm; R1:3.5 mm; Limiting speed:3200 r/min; Housing:SYWR 507 Y; N1:14.5 mm; Basic static load rating C0:15.3 kN; H1:47.6 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| KH-275E Kaydon Slewing Ring Bearings | Accessories:No Shield, no Seal,; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:20800 N; Sealed Speed Rating n3:8000 rpm; d:25.000 mm; Grease Speed Rating n1:8000 rpm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:14000 N; D:52.0000 mm; B:20.60 mm; |
| MTE-21 Kaydon Slewing Ring Bearings | H:144.463 mm; da:61.913 mm; S:0.794 mm; s:31.75 mm; Basic dynamic load rating C:147 kN; d2:101.6 mm; J1:47.625 mm; A:88.9 mm; A1:99.219 mm; Limiting speed:3100 r/min; Attachment bolt diameter G:15.875 mm; H2:41.275 mm; L:266.7 mm; Mass bearing unit:8.62 kg; B:85.725 mm; J max.:225.425 mm; J min.:209.55 mm; H1:69.85 mm; |