| 16369001 Kaydon Slewing Ring Bearings | Basic dynamic load rating C:224 kN; D:80.963 mm; Specific static load factor K0:300 N/mm²; Da min.:72.4 mm; da max.:57.9 mm; Basic static load rating C0:670 kN; M:4 mm; Sealing solution:Triple-lip seals; Da max.:75.9 mm; r2 min.:1 mm; α:6 °; Lubricant:Regular relubricatio; Material constant KM:330; d:50.8 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; ra max.:0.6 mm; |
| MTE-54 Kaydon Slewing Ring Bearings | Grease Speed Rating n1:3200 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4300 rpm; d:70.000 mm; Basic Dynamic Radial Load Rating C:88400 N; Basic Static Radial Load Rating Co:80000 N; Sealed Speed Rating n3:3200 rpm; Accessories:Shield & Seal & Snap; D:125.0000 mm; B:39.70 mm; |
| HS6-43P1Z Kaydon Slewing Ring Bearings | Sleeve:S 3076x13.15/16; B:48.666 mm; d3 max.:450.977 mm; G:378.993 mm; B5:59.766 mm; d:380 mm; Mass adapter sleeve assembly:43 kg; B1:196.418 mm; Threads per inch:5; d1:354.012 mm; Hydraulic nut:HMVC 76E; |
| 16298001 Kaydon Slewing Ring Bearings | Static axial stiffness, preload class C:67 N/µm; D1:45.81 mm; d2:36.4 mm; ra max.:1 mm; B:13 mm; Static axial stiffness, preload class B:49 N/µm; Attainable speed for grease lubrication:47000 r/min; D:55 mm; Basic dynamic load rating C:9.36 kN; Calculation factor f2B:1.03; Calculation factor fHC:1.01; Static axial stiffness, preload class A:31 N/µm; Fatigue load limit Pu:0.22 kN; |
| RK6-43P1Z Kaydon Slewing Ring Bearings | A:60 mm; H2:24 mm; A1:40 mm; H:126 mm; J:171.5 mm; N4:4 mm; Rα:45 °; Basic dynamic load rating C:43.6 kN; Recommended tightening torque for grub screw:16.5 N·m; Housing material:Cast iron; A5:37.5 mm; Hexagonal key size for grub screw N:4.763 mm; GN:1/4-28 SAE-LT; Thread grub screw G2:3/8-24 UNF; Recommended diameter for attachment bolts, inch G:0.625 in; J6:201 mm; N1:18 mm; L:219 mm; |
| MTE-210X Kaydon Slewing Ring Bearings | Preload class B GB:330 N; Preload class A GA:110 N; Static axial stiffness, preload class B:156 N/µm; Calculation factor f:1.06; Calculation factor e:0.68; Calculation factor f2A:1; db min.:49.6 mm; D1:64.25 mm; Fatigue load limit Pu:0.345 kN; d1:55.7 mm; Calculation factor fHC:1.01; r3,4 min.:0.6 mm; Static axial stiffness, preload class C:204 N/µm; d2:53.6 mm; Number of balls z:21; a:22.2 mm; |
| MTO-210X Kaydon Slewing Ring Bearings | D:150 mm; Calculation factor f1:1; Calculation factor f2B:1.03; rb max.:1 mm; d:100 mm; Basic static load rating C0:40 kN; da min.:107 mm; Mass bearing:1.26 kg; Reference grease quantity Gref:17 cm³; Fatigue load limit Pu:1.5 kN; r3,4 min.:1 mm; Ball diameter Dw:12.7 mm; D1:132.61 mm; db min.:107 mm; Preload class C GC:1440 N; Calculation factor f2C:1.05; Basic dynamic load rating C:44.9 kN; Attainable speed for grease lubrication:12300 r/min; |
| XSU140544 INA Slewing Ring Bearings | with tapered bore:850 min-1; d:170 mm; Pu:1150 kN; Dynamic (Cr):4.5 mm; Oil:199.840 kN; D:280 mm; B:109 mm; with cylindrical bore:670 min-1; Grease:2090 kN; rs (min):2.1 mm; Static (Cor):8.3 mm; |